Hissautomat | Lagerautomater

Increased storage capacity with a significantly smaller footprint
Large storage area with small footprint
Accurate stock inventory due to integration with internal ERP/WMS systems
More security and protection for operator and goods
Modular expandability

Hissautomat | Lagerautomater

The modular lift racking is a self-contained system in which trays are stored vertically on both sides of the unit. By reading a bar code or pressing a button, trays are automatically conveyed to the extractor located in the centre and transported from here to the service opening.

Due to the modular design, the LRK can be adjusted to the relevant height before or after installation.

The LRK reads each tray automatically – the products to be stored are then assigned to the ideal storage location at intervals of 25 mm. Depending on the room height, it is possible to save up to 85% on floor space in comparison with conventional systems.

The modular design of the LRK provides almost unlimited flexibility regarding the use of different ceiling heights.

The system height can be selected in 100 mm increments so that the lift racking always corresponds to the respective capacity and height requirements. Even if its location changes, the lift racking can be quickly adapted to the new conditions by adding or removing modules.

When used over several floors, up to 6 service openings can be integrated into the front and back of the LRC at any point; these can also be subsequently changed . The lift door in each service opening prevents draughts escaping and protects operators and stored goods.

Funktioner

Easy integration into existing warehousing processes

In order to integrate the lift system optimally into your warehousing processes, Jungheinrich offers a simple and direct connection to Warehouse Management Systems (WMS), such as the Jungheinrich WMS or SAP® EWM. The Jungheinrich Logistics Interface software or the LRK Connect add-on module for SAP® EWM are used to optimise order picking processes in the lift system and facilitate stock management in the WMS. So not only are your items efficiently stored in the smallest possible area, but you are provided with a complete overview, ultimate efficiency and maximum process reliability.

Rapid response to changes thanks to modular design

The modular design means that the height of the unit can be quickly and cost-effectively adjusted to changes in location or working conditions.

High flexibility through simple reprogramming

Each tray can be easily adapted to the required needs:

High accuracy

Integrated pick-to-light systems, bar code readers and software interfaces guarantee the highest level of accuracy. Connection to conveyors, robot arms or lifting mechanisms, guarantees maximum comfort in the workplace.

High active and passive safety

Not only does the lift racking system allow controlled access to individual trays, it also facilitates the precise tracking of which operator has accessed which tray. Lift doors guarantee increased security and a high level of protection for personnel and goods.

Efficient operation thanks to optimum ergonomics

The lift racking system operates according to the goods to person principle: Required parts are automatically delivered to the ergonomically designed service opening. The operator is no longer required to climb, bend or stretch to reach the stored item. The trays can be brought to an individual working height and connected with conveyors or lifting mechanisms. Optional integrated Pick-to-Light systems display the storage compartment and quantity to be removed, facilitating a very high picking rate.

85% less space required

The almost continuous storage of trays at intervals of just 25 mm saves up to 85% on the size of the footprint.

Mediatek